Description

Introduction

Insulation Heat Shrink Tubing

Long service life

With adequate mechanical properties and flexibility

The product has the advantages of soft, non-slip, beautiful, fast shrinkage, stable performance and so on.

High tensile strength, not easy to break

Specification

Specifications	Internal diamete	Downsize(mm)		Standard	Scope of
	diameter	Downsize(mm)		packaging	application
	(mm	Inside of supply	wall thickness	(mm)	(mm
①0.6CB	0.90±0.20	≤0.40	0.20±0.10	200	0.4~0.7
①0.8CB	1.10±0.20	≤0.50	0.20±0.10	200	0.6~0.8
①1.0CB	1.40±0.20	≤0.65	0.20±0.10	200	0.7～1.0
①1.5CB	1.90±0.20	≤0.85	0.20±0.10	200	0.9~1.4
①2.0CB	2.40±0.20	≤1.00	0.22±0.10	200	1.1~1.8
①2.5CB	2.90±0.20	≤1.30	0.25±0.10	200	1.4~2.3
①3.0CB	3.40±0.20	≤1.50	0.28±0.10	200	1.6~2.7
①3.5CB	3.90±0.20	≤1.80	0.28±0.10	200	1.9~3.2
①4.0CB	4.40±0.20	≤2.00	0.30±0.10	200	2.1~3.6
①4.5CB	4.90±0.20	≤2.30	0.30±0.10	100	2.4~4.0
①5.0CB	5.50±0.20	≤2.50	0.32±0.10	100	2.6~4.5
①6.0CB	6.50±0.20	≤3.00	0.32±0.10	100	3.1~5.4
〇7.0CB	7.50±0.30	≤3.50	0.32±0.10	200	3.7~6.3
①8.0CB	8.50±0.30	≤4.00	0.32±0.10	200	4.2~7.2
①9.0CB	9.50±0.30	≤4.50	0.35±0.10	200	4.7~8.0
①10CB	10.50±0.30	≤5.00	0.35±0.10	200	5.2～9.0
①11CB	11.50±0.30	≤5.50	0.40±0.10	200	5.8~10.0
①12CB	12.50±0.30	≤6.00	0.40±0.10	200	6.2～11.0
①13CB	13.50±0.30	≤6.50	0.40±0.10	200	6.7～12.0
①14CB	14.50±0.30	≤7.00	0.40±0.10	200	7.3~13.0
①15CB	15.50±0.40	≤7.50	0.40±0.10	200	7.8~14.0
①16CB	16.50±0.40	≤8.00	0.40±0.10	200	.3~15.8
①17CB	17.50±0.40	≤8.50	0.40±0.10	200	.8~16.0
①18CB	18.50±0.40	≤9.00	0.42±0.10	200	9.3~17.0
①20CB	20.50±0.50	≤10.0	0.45±0.10	200	10.5~19.0
①22CB	22.50±0.50	≤11.0	0.45±0.10	200	11.5~20.5
①25CB	25.50±0.50	≤12.5	0.45±0.10	100	13.0~24.0
①28CB	28.50±0.50	≤14.0	0.60±0.10	100	14.5~27.0

Product application

Insulation Heat Shrink Tubing,Heat shrink tubing is a special polyolefin material heat shrinkable tubing, which can also be called EVA material. The outer layer is made of high-quality soft cross-linked polyolefin material and the inner layer of hot melt adhesive composite processing, the outer layer of insulation, corrosion resistance, wear resistance and other characteristics, the inner layer of material has a low melting point, waterproof sealing and high adhesion and other advantages.Shrinking can be done by heating with oven, heat gun and hot water.

Insulation Heat Shrink Tubing application areas include electrical protection, communications, automotive, marine product manufacturing, etc.

Product detail

Flame retardant material: environmental flame retardant material, fine very soft elastic, flame retardant, excellent insulation performance.

Double contraction: contraction temperature is low, contraction fast, only need a few seconds to complete contraction, convenient and quick.

High quality: select high quality PE material, anti-aging, tough, not easy to break, delay the service life of data line

Product qualification

The company's products have good dielectric properties, self-extinguishing and excellent flexibility, and are widely used in H & N grade motor insulation, household appliances, electric heating equipment, TV and electronic instruments, such as the in-flight bagging wire harness insulation protectio

Product certification

Our factory has different production lines to meet various customers' demands. All the products have several steps during the manufacturing. Some products are produced by fully automatic production lines.

We have 5s strict management policy. We assign different colleagues to account for each step. From the start to the end, we do our best to avoid faults.

Our advantages

1,We have up to 500 supply chains and 5,000 products. We can provide both standardized products and customized products with flexible MOQ and timely delivery.

our advatages

2,Our one-stop service saves you much time and money. Attentive service and quick response are our values.

From product quotation, customization, production, follow-up manufacturing, receiving, inspection, storage, booking, customs clearance, filling the container, we check the whole process to ensure that your goods are delivered on time. Whether it is a small quantity of bulk cargo or sending a full container of goods, we are able to provide both quality service.

product-600-600

FAQ

Q: Are you a manufacturer or trading company?

A: We are a trading company who can provide extra more value than factories. We can give you lower MOQ request, small OEM order, gather different products to our warehouse that one factory can not provide all.

Q: What's your MOQ?

A: It depends on different products from 5pcs to 1000pcs.

Q: Are the shipping cost and duty included?

A: Before quote to you, we will ask you for order quantity,shipping method and duty information. The price you request includes all cost, we will quote you in this policy.

Q: Can I custom my own logo design?

A: Yes, we can do label for your own logo sticker. If you need logo on the surface of product by laser or print. We need MOQ that depends on different models.